Eigenschaften
- basiert auf ESP-12F (4 MByte flash)
- zweiteilige Konstruktion
- eher für Entwicklung
- Antenne ungünstig, sehr schlechter Empfang
- Preis inzwischen $6.80, ursprünglich unter $3.00
oberes Board
- Spannungsregler mit Micro-USB-Eingang
- RGB-LED
- LDR (am ADC-Pin)
- Taster
unteres Board
- CH341 USB UART (ebenfalls mit Micro-USB-Eingang)
- Reset-Taster
- Flash-Taster
Pinout
Pin | Funktion | Verwendung | reset state |
TXD | TXD | (usb-to-serial) | tx |
RXD | RXD | (usb-to-serial) | rx |
ADC | analog in | photo resisitor | |
GPIO16 | IO | ||
GPIO5 | IO, SCL | ||
GPIO4 | IO, SDA | push button | |
GPIO0 | IO | flash button | high |
GPIO2 | IO | build-in led (blue) | high |
GPIO14 | IO, SCK | ||
GPIO12 | IO, MISO | rgb led green | |
GPIO13 | IO, MOSI | rgb led blue | |
GPIO15 | IO, SS | rgb led red | low |
GND | Ground | ||
VCC | 5V | ||
REST | Reset | pull-up, button | |
CH_PD | chip power-down | high |